SUMMARIZING OUR SYSTEMS: REZ-STONE 9500
Here at Hoover Wells, we offer a wide variety of services. One of those services is epoxy flooring. So, we are here to help you better understand how to select one of these epoxy flooring systems. In this article, we will be covering our Rez-Stone 9500 Epoxy Floor Topping.
Rez-Stone 9500 is a three-component, 100% solids, epoxy-based, mortar flooring system. This system can be used where rapid strength gaining overlayment is required. When applied at ¼”, it is more impact, chemical, and wear-resistant than conventional floor systems. Typically recommended for economical leveling or resurfacing of concrete areas of floors subjected to heavy industrial use.
- 100% solids, can be applied at any thickness when necessary
- Excellent chemical, impact, and abrasion-resistance
- Non-slip finishes available
- USDA Compliant materials
- Solvent free
- No VOC’s
After proper surface preparation, the concrete surface will be primed using Rez-Stone 5017 primer-binder with a heavy-duty medium nap roller. Lightly broadcast 1 pound per 5 square feet of blended aggregate into the wet primer to help trowel ability. Blend proportioned amounts of Rez-Stone 5017 Part A and Part B for 3 minutes using mechanical agitation. Load proportioned matrix aggregate into a paddle or screw-type mortar mixer along with the pre-blended 5017 binder. Mix for 1 minute. Place mixed material onto floor using a screed box or straight edge.
Power-trowel the placed matrix for a smooth compacted finish. Once matrix has cured it should be lightly scraped with an ice spud or similar scraping tool before top-coating. Roller-apply one of Rez-Stone’s 100% solids epoxy topcoats at the desired coverage rate. If a non-slip finish is needed a silica or aluminum oxide aggregate may be incorporated into the topcoat.
For more information on Rez-Stone Epoxy systems...
CHECK OUT OUR REZ-STONE BINDER!
It's full of all the information you would every need regarding our Rez-Stone products.
The experts at Hoover Wells believe Rez-Stone 9500 is a tough, protection system that will surely work where rapid strength gaining overlayment is required. We are only a call or click away to help with any questions you may have about our Rez-Stone 9500 Epoxy Floor Topping or any of our other high-performance flooring systems.