SUMMARIZING OUR SYSTEMS: 9230
Rez-Stone 9230 is a two-coat epoxy floor system designed for hi-build epoxy protection over new or like new concrete substrates. Rez-Stone 9230 provides high gloss, flat-line finish, and excellent wear resistance on light-to-heavy industrial floor applications. Rez-Stone 9230 incorporates two coats of 100% solids epoxy for an economical, long-lasting, 30 mil floor system.
- Easy two-coat application
- Excellent light reflectivity
- Solvent Free
- No VOC’s
Concrete surfaces must be clean and sound. Remove all dirt, laitance, grease, curing compounds, and other bond-inhibiting contaminants by shot blasting, scarification, or other approved mechanical methods. Shot blasting is recommended over bare concrete to create an acceptable profile for the epoxy coating system. Treated surfaces must be completely clean before applying any coatings.
After proper surface preparation the concrete surface will be primed using a straight tight squeegee coat of Rez-Stone 5017 epoxy (approximately 8 mil D.F.T.). After curing of the primer all cracks and holes may be patched with a hand trowel using Rez-Stone 2610 epoxy crack repair kit. After patching a topcoat of Rez-Stone 5058 may be applied with a notched squeegee at the rate of 75 square feet per gallon (approximately 22 mils D.F.T.) and lightly back-rolled for a smooth flat-line finish. Do not allow more than 24 hours between epoxy coatings. If more time passes over, cured surface must be lightly sanded or screened before applying additional coatings to prevent inner coat adhesion problems.
For more information on Rez-Stone Epoxy systems...
CHECK OUT OUR REZ-STONE BINDER!
It's full of all the information you would every need regarding our Rez-Stone products and even has specification charts on everything, including Rez-Stone 9230!
The experts at Hoover Wells know that Rez-Stone 9230 works best for hi-build epoxy protection over new or like new concrete substrates. It provides high gloss, flat-line finish, and excellent wear resistance on light-to-heavy industrial floor applications. Since it incorporates two coats of 100% solids epoxy, it is an economical and long-lasting 30 mil floor system. We are only a call or click away to help with any questions you may have about our Rez-Stone 9230 or any of our other high-performance flooring systems.