SUMMARIZING OUR SYSTEMS: 9220-OP
Rez-Stone 9220-OP is an economical epoxy coating system which provides hi-build 20 mil protection over new or like new concrete surfaces. Rez-Stone 9220-OP is designed for light-to-medium industrial floor surfaces where light orange peel finish is required. Rez-Stone 9220-OP incorporates a 100% solids epoxy primer and topcoat for long lasting, semi-gloss, textured finish, resistant to most common industrial cleaners and fluids.
- Easy-fast application
- High abrasion resistance
- Unique orange peel finish
Concrete surfaces must be clean and sound. Remove all dirt, laitance, grease, curing compounds, and other bond-inhibiting contaminants by shot blasting, scarification, or other approved mechanical methods. Shot blasting is recommended over bare concrete to create an acceptable profile for the epoxy coating system. Treated surfaces must be completely clean before applying any coatings.
For more information on Rez-Stone Epoxy systems...
CHECK OUT OUR REZ-STONE BINDER!
It's full of all the information you would every need regarding our Rez-Stone products and even has specification charts on everything, including Rez-Stone 9220!
After proper surface preparation apply a prime coat of Rez-Stone 5017 using a flat rubber squeegee or roller. After primer has cured fill all cracks and holes using Rez-Stone 2610 epoxy crack repair. After patching apply Rez-Stone 5078 using a notched rubber squeegee or roller and backroll for an even finish. Do not allow primer to cure more than 24 hours before applying topcoat. If more time is allowed the over-cured surface must be lightly sanded or screened before applying additional coats. This will prevent any inner coat adhesion problems. If more non-slip finish is desired a clean, dry, and graded silica or aluminum oxide aggregate may be incorporated into the Rez-Stone 5078 topcoat.
The experts at Hoover Wells know that Rez-Stone 9220 works best for light-to-medium industrial floor surface where light orange peel finish is required. This long lasting, semi-gloss, textured finish, is resistant to most common industrial cleaners and fluids too! We are only a call or click away to help with any questions you may have about our Rez-Stone 9220 or any of our other high-performance flooring systems.